but. Did you ever find a solution? I don't see a reason why NM shoudn't cleanup interfaces configured by itself on exit. It started when Norton found a virus and said it must shut down to repair, and that was the end. http://metafliter.com/my-computer/my-computer.html
In most cases, this driver is automatically installed when you install Apcupsd. You will then need to make the normal changes to the /etc/apcupsd/apcupsd.conf file. If on the I: line, Driver is listed as Driver=none then you do not have the HID driver loaded or the driver did not attach to the UPS. Networkmanager is bringing some network connections down on shutdown and it is currently not possible to avoid.
If you prefer to manually reboot your system, you can skip this final system dependent installation step by specifying the disable-install-distdir option on the './configure' command (see below for more details). Installation is very simple and straight-forward: Simply double-click the installer executable and follow the instructions. so hopefully it did!) I'm losin my mind here....... So, the question is, why does dhclient exit.
While not abnormal for debuggers, this increases system memory footprint until the target exits. No matter what I try (e.g. However, we have some reports that recent versions of Solaris (7 & 8) appear to have removed this eeprom option and there seems to be no way to suppress the serial If you have a vendor-supplied cable, find out what cable type you have by looking on the flat ends of the cable for a number, such as 940-0020A, stamped in the
The default is disabled. --enable-apcagent This option enables building the apcagent menubar application on Mac OS X platforms. Report lilron1976- Nov 25, 2009 at 07:22 AM did u ever find out the problem with the blue screen of death ? Members can monitor the statuses of their requests from their account pages. http://ccm.net/forum/affich-6288-windows-shut-down-restart-attempt-fails Eventually I pulled out both the 1GB RAMS and tried each one individually and realised that one was malfunctioning.
All you need to do is check that your USB subsystem is working (see USB Configuration); if so, you can go to the build and install step. This is useful if your operating system is not directly supported by apcupsd or if you want to run two copies of apcupsd on the same system. Yes No Thanks for your feedback.Don't forget to take a few seconds to say thanks: Thank you Thanks for your feedback.We're sorry. My Computer Computer Type: PC/Desktop System Manufacturer/Model Number: Dell XPS13 OS: Windows 10 CPU: Core i5 Quote tacoban View Profile View Forum Posts Private Message Junior Member Posts : 20 Windows
If NM notices that carrier was lost, and that when it comes back up, the router refuses to speak to it until it does 802.1X authentication again, should NM ignore that, http://hehs24.rssing.com/chan-13004788/all_p415.html The DHCP standard doesn't include any exceptions for NFS. console=ttyS0 graphical" arguments. Try to work with the big picture, not just one use case.
pcnet PCNET is an alternative for SNMP available on APC's AP9617 family of smart slot modules. http://metafliter.com/my-computer/my-computer-is-unusable-please-help.html James Be Yourself, but, Be Your Best Self.0 0 01/31/16--08:08: Win7 Updates Contact us about this article Win7 Pro not updating 0 0 11/22/09--10:29: How to delete unwanted TCP/IP This file contains the configuration settings for the package. Put the disc in your crappy computer and select to boot off cd.
Stopping Network Manager... This is a usual situation, under which NetworkManager should never under any circumstances tear down the interface or change the default route unless there's another connection. Solution This is a kernel bug and is most easily worked around by not hot- unplugging the UPS while apcupsd is running. check over here Microsoft Customer Support Microsoft Community Forums Windows Client Sign in United States (English) Brasil (Português)Česká republika (Čeština)Deutschland (Deutsch)España (Español)France (Français)Indonesia (Bahasa)Italia (Italiano)România (Română)Türkiye (Türkçe)Россия (Русский)ישראל (עברית)المملكة العربية السعودية (العربية)ไทย (ไทย)대한민국 (한국어)中华人民共和国
If your /sbin/rc0 file does not look like the lines shown above, do not modify the file. Recommended Options for most Systems For most systems, we recommend the following options: ./configure --prefix=/usr --sbindir=/sbin --enable-usb and you can optionally build and install the CGI programs as follows: ./configure --prefix=/usr Mine is doing the same thing it drives me nuts Report e- Jul 24, 2008 at 06:37 PM my computer gets the blue screen and shuts off and then re starts.
It doesn't send or receive any data on the network. That means, under some circumstances, connectivity can be lost. 3) Removing a route Same as #2. Something similar to > tshark -i br0 -o /tmp/data.pcap host
Ensure that you read the distributions/openbsd/README file before running apcupsd. The reboot process is hanging. I would like to either implement any of your ideas or document why it won't be implemented. http://metafliter.com/my-computer/my-computer-is-very-slow.html let me know a.s.a.p.
The text you pasted should vanish immediately. Any suggestions are welcome. (In reply to comment #87) > Thanks Harald for providing "KillMode=process" solution and Brian for > verifying it. You must install the SUNWlibusb and SUNWlibusbugen packages BEFORE attempting to build Apcupsd. In order to support unattended operation and shutdown during a power failure, it's important that the UPS remove power after the shutdown completes.
Again, the script will still run.If you're not logged in as an administrator, you won't be prompted for a password. This would require dracut/anaconda to tell us what is networking and what is an nfs mounting.
© Copyright 2017 metafliter.com. All rights reserved.